At the front this AP kit has height adjustable Coil-Overs with gas assisted zinc plated dampers. The springs mount on to seats which can be wound up or down the damper body to achieve a lowering anywhere between 35mm and 60mm. The rear dampers are also gas assisted and feature an epoxy coated finish for durability. The rear height can be lowered anywhere between 20mm and 50mm by adjusting the spring platform. The damper settings are non-adjustable and have been engineered to work in harmony with the uprated AP springs.

What’s included in this kit?
This kit includes two pre-set front dampers with threaded spring seats, two pre-set rear dampers, two rear adjustable spring seats and a set of four uprated springs. A special adjusting spanner is also included. This is required for adjusting the vehicle height.

The handling
This AP kit has been engineered to give a firmer, sporty ride whilst retaining the suppleness required for day-to-day road use. Reduced ride height will reduce body roll and allow faster cornering.

This kit will fit…
This AP kit is suitable for all Fiat Stilo models (except Abarth models) manufactured from 2001 on. These models have a chassis code/body type known as 192.

PLEASE NOTE
Lowering a vehicle by 50mm or more may, under certain circumstances, cause tyre/arch clearance problems.

As with all suspension kits it may be necessary to fit spacers/shims behind the wheels for a little added clearance. This depends greatly on the wheel/tyre sizes being used.

Choosing the right option
You will need to establish which type of front strut your Stilo uses before ordering from the list below. The simplest way of doing this is to measure the centre-to-centre distance between the two holes drilled into the lower mount of the front struts. Some models have a 57mm spacing, whilst others have a 72mm spacing.